Sony DMXP01 Digital Mixer

Description:
The Sony DMX-P01 is a professional digital field mixer that combines the convenience of portable studio grade audio mixing, with the pristine fidelity of high resolution digital technology. The mixer features 4 electronically balanced XLR inputs that are switchable between mic and line level signal. The output section also features 2 XLR outputs that are capable of providing mic or line level signal as well. The mixer features 24-bit A/D and D/A converters and 32-bit signal processing. The DMXP-01 also supports both, 48kHz and 96kHz sampling frequencies. AES/EBU and S/PDIF outputs are provided, a second S/PDIF input can be used to cascade additional mixers. Channels 1/2 and 3/4 feature stereo linking, phase reverse switches on channels 2 and 4 allow M-S stereo decoding. Preset user locations are provided for storing parameter settings, providing quick recall of settings required by different users. The backlit LCD display features a choice of metering modes. VU, BBC-type, DIN-type, NORDIC-type, IEC-type 1 and dBFS metering are all user selectable. Low-cut filters and peak limiters are all user programmable and +48V phantom power is user switchable. The mixer is powered for approximately 5 hours with 8 AA batteries, external DC power is achieved via 4-pin XLR or DC power inputs. Features ? Outstanding audio quality User-friendly Full 24 bit processing Sampling rate of either 48 kHz or 96kHz Front panel controls Panel lock and parameter lock functionality Lightweight Specifications ? Inputs Analog inputs 4 ch, XLR-3-31 (x4), electrically balanced, microphone power; + 48 V (on/off) Mic level: - 70 to -30 dBu (max. 0 dBu), 2.2kohm or more Line level: -30 to +10 dBu (max. +24 dBu), 10kohm or more Phase reverse on channels 2 and 4 Cascade input (digital):2 buses (L/R), S/PDIF (IEC 60958 coaxial), phono, 75 ohm OutputsMaster outputs (analog): 2 ch (L/R), -60/-10/+4 dBu (max. +24 dBu), XLR-3-32 (x2), balanced, 600 ohm load or more Digital outputs: 2 ch (L/R), AES/EBU, XLR-3-32 (x1), electrically balanced, 110 ohm load or more Cascade output (or S/PDIF output): 2 ch (L/R), S/PDIF (IEC 60958 coaxial), phono, unbalanced 75 ohm load or more Tape outputs (analog): 2 ch (L/R), -10 dBu (max. -10dBu), 3.5mm dia. TRS jack, unbalanced, 10 kohm load or more Camera send/return 2 ch (L/R), 12-pin Tajimi, balanced Send level: -60/-10/+4 dBu (max. +24 dBu), 600 ohm load or more Return level: 0 dBu (max. +20 dBu), 10kohm or more A/D converter: 24 bits D/A converter: 24 bits Sampling frequency: 48 kHz or 96kHz Signal processing: 32 bits Low cut filter 50Hz to 400Hz (48kHz sampling) 70Hz to 400Hz (96kHz sampling) 12dB/octave in both 48kHz and 96kHz sampling Input/output limiter Threshold: 0 to +20 dB Output compressor Threshold: -20 to +10 dB, ratio, 2:1 to 10:1, attack time: 0.5 to 100.00 ms, release time: 0.1 to 2.0 s Frequency response 20 Hz to 40 kHz +0.5/-3.0 dB (at 96 kHz sampling frequency) 20 Hz to 20 kHz +0.5/1.0 dB (at 48 Khz sampling frequency) Total Harmonic distortion: Less than 0.05% Equivalent input noise: -126 dBu (IHF-A) Crosstalk: Less than -90 dB (1kHz) Level meter calibration: VU, BBC-type DIN-type, NORDIC-type, IEC-type1, dBSF (selectable) Monitoring: 1/4-inch TRS jack (x1) and 3.5mm dia. TRS jack (x1) with level control Operating Voltage Internal: DC 12V (eight AA-size (LR6) alkaline batteries) External: DC 12 V via DC jack or DC 10 to 15 V via an XLR 4-pin connector Battery life: 5 hours or more with Sony AA-size alkaline batteries (LR6SG) at 25?C Power supply (to wireless microphone): DC 12 V via 4-pin Hirose connector Operating temperature: -5 to +40øC (+23 to +104?F) Storage temperature: -30 to +70?C (-22 to +158?F) Dimensions (w x h x d): 266 x 68 x 206 mm ( 10-1/2 x 2-3/4 x 8-1/8 inches) Weight: Approximately 2.2 kg (4lb 13 oz)